Carbon Steel Type Kl Wt 10mm Extruded Fin Tube

Extruded finned tube Fin Tube Strip Air Heater Gilled Tube Radiator Gilled Tube Fin Tube Divaice Fin Tube Connector Puller

The finned tube adopts the form of base tube covering aluminum tube, (the base tube can be carbon steel, stainless steel, copper) through machine extrusion to form the fin, the base of the fin is close to the outer wall of the tube, with high heat transfer coefficient and excellent heat transfer performance.

Maximum Working Temperature : 545

Fin Materials : Aluminium

Base Tube Diameter: 10mm-51mm

Base Tube Wall Thickness: 1.65mm-3.0mm

Fin Thickness: 0.3mm-1.2mm

Fin Pitch: 2.0mm-15.0mm

Fin High: 5mm-16mm

Base Tube Material: Carbon Steel Tube, Stainless Steel Tube, Alloy Tube

Fin Material : Aluminum

The advantage of finned tubes is that :

when the heat source or cold source is liquid, such as steam, water, thermal oil. When the gas needs to be heated or cooled by the gas, a larger heat transfer area is required. The area of finned tube is several times or even 10 times that of ordinary light tube. This not only increases the heat transfer efficiency of the equipment, but also greatly reduces the heat transfer cost.

wt 10mm extruded fin tube

type kl extruded fin tube

wt 10mm low fin tube

Carbon Steel Type Kl Wt 10mm Extruded Fin Tube Images