ASTM A252 Gr.1 Gr.2 Gr.3 Welded Steel Tube: Large Diameter Straight Seam Welded Steel Pipe
Structure
ASTM A252 is a specification for welded and seamless steel pipe piles used in construction and structural applications. The specification covers three grades of steel, namely Gr.1, Gr.2, and Gr.3, which differ in their mechanical properties and chemical composition. These pipes are primarily used for piling and structural applications where high strength and durability are required.
Material
The material used in ASTM A252 pipes is typically carbon steel, which provides a good balance of strength, ductility, and weldability. The pipes are manufactured using a straight seam welding process, ensuring uniformity and structural integrity.
Specification
The ASTM A252 specification outlines the requirements for the chemical composition, mechanical properties, and testing methods for the welded steel pipes. The pipes are available in various sizes and wall thicknesses to meet specific project requirements.
Key Features
- Large Diameter: Designed for applications requiring large diameter pipes.
- Welded Construction: Straight seam welded for enhanced strength and reliability.
- High Strength: Available in three grades with varying mechanical properties.
- Versatile Applications: Suitable for use in various structural and piling applications.
Chemical Composition
The chemical composition of ASTM A252 grades is critical for ensuring the desired mechanical properties. Below is a table summarizing the typical chemical composition for each grade:
| Element | Gr.1 (%) | Gr.2 (%) | Gr.3 (%) |
| Carbon (C) | 0.26 max | 0.24 max | 0.23 max |
| Manganese (Mn) | 0.60-0.90 | 0.70-1.00 | 0.80-1.20 |
| Phosphorus (P) | 0.04 max | 0.04 max | 0.04 max |
| Sulfur (S) | 0.05 max | 0.05 max | 0.05 max |
| Silicon (Si) | 0.10-0.40 | 0.10-0.40 | 0.10-0.40 |
Mechanical Properties
The mechanical properties of ASTM A252 grades are essential for determining their suitability for various applications. The following table presents the typical mechanical properties for each grade:
| Property | Gr.1 | Gr.2 | Gr.3 |
| Yield Strength (ksi) | 35 | 42 | 50 |
| Tensile Strength (ksi) | 60 | 60 | 65 |
| Elongation (%) | 20 | 20 | 18 |
| Charpy V-Notch Impact (ft-lb) | 15 (min) | 20 (min) | 20 (min) |
Steel Grade
- Gr.1: Lower strength grade, suitable for less demanding applications.
- Gr.2: Intermediate strength grade, commonly used in various structural applications.
- Gr.3: High strength grade, ideal for heavy-duty applications requiring enhanced performance.
Application
ASTM A252 welded steel pipes are widely used in various applications, including:
- Piling: Used as foundation piles in construction projects.
- Bridges: Structural components in bridge construction.
- Marine Structures: Supports for docks and piers.
- Industrial Applications: Used in various industrial structures and frameworks.
Possible Alternative Grades
While ASTM A252 is a widely accepted standard, there are alternative grades that may be considered based on specific project requirements:
- ASTM A36: General structural steel with lower strength.
- ASTM A500: Cold-formed welded and seamless structural tubing.
- ASTM A572: High-strength low-alloy structural steel.
TORICH Group, an one-stop service provider of raw materials engaged in raw material production, R&D and
trade, has 30+ years of experience in the market, exported to 56 +countries, and won good reputation and
credibility among domestic and foreign customers.
The company's production plant covers an area of over 10,000 square meters, with an annual production
capacity of 50,000 tons of materials and a comprehensive trading and warehousing capacity of 100,000 tons, which can satisfy customers' personalized needs for raw materials in terms of diversity and timeliness.
The group holds shares in more than ten domestic production entities, whose main products include
seamless steel pipes ( carbon steel and stainless steel), welded pipes ( carbon steel and stainless steel), pipe fittings ( carbon steel and stainless steel), titanium (titanium tubes, titanium rods, titanium cakes, titanium plates, etc.), aluminum (aluminum tubes, aluminum rods, aluminum die casting, aluminum casting, CNC machining), and CNC deep processing of metal materials such as tubes, rods, and casting parts.
Over the past 30 years, the company has been gradually developing new technologies and materials to meet
the growing needs of customers and various diversified needs, exporting to more than 56 countries and still
increasing the number of exporting countries, aiming to help customers to solve the demand for raw materials, and to facilitate one-stop purchasing for customers.
Q: Are you trading company or manufacturer ?
A: manufacturer,also can do trading.
Q: How long is your delivery time?
A: Generally speaking,it is 10-15 days if the goods are in stock,or it is 30-40 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples? is it free or extra ?
A: Yes, we could offer the sample for free charge but need pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=2000USD, 100% in advance. Payment>=2000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact with me.
Product Tags:
|
|
ASTM A252 Gr 2 Welded Steel Tube Large Diameter Straight Seam Welded Steel Pipe For Structure Images
|
